Window

Yes, this is something that many sites have already done but when I received that Cold Cathode I just had to do one too. This is not ment to be a complete tutorial but more like a picture tour. Hope you like it.

	Started out by marking the hole. I just had to add that little detail to the corner.
	For cutting I used a jiggsaw. I chose a blade which is ment for cutting steel.
	Cutting the basic shape took only 10 minutes. Fast and easy.
	I used my Ferm (a Dremel clone) and cutting wheels to get the details done. Took around 20 minutes. Window itself is 2 mm thick acrylic sheet. Same stuff that I used in my Cryo mod.
	I used a knife to open up the side of the electric wire. This way I could get that copper wiring out and have a cheap tube to be placed around the edges of the window.
	Tube installed. Used a few drops of superglue on the corners to keep it in place.
	Window installed. I used glass silicone as a glue to attach the acrylic.
	Right side picture with Cold Cathode turned on. Yes, I'm still using Abit kt7. ;)

Cheap, easy and fast. Took around 40 minutes to make. No special skills are needed. Why not make one? :)

Questions, comments?

Back to the frontpage.